Flojet Pump Beer G56

Flojet Pump Beer G56

Designed for dispensing beer through both long or short, vertical or horizontal line runs while maintaining the brewers recommended applied pressure on the beer.

The gas pressure applied to the beer and the air/gas pressure applied to the pump, to move the beer from the vessel to the point of dispense, are completely separate, thus ensuring the repeatable quality of presentation and taste to the consumer.

PRODUCT FEATURES

Model No.: G56 Series

• Air compression can be used to pressurize the beer pumps
• Cost-effective: no need for mixed gases or gas blenders
• The beer pump increases the pressure in the product dispense line, which ensures the inherent gas in the solution (beer) cannot break out
• Smaller I.D. tubing can be used in some installations, which reduces the amount of beer wasted when cleaning lines
• The air/gas used to power the pump never comes into contact with the beer, providing protection from flat or tainted beer due to impure air contamination or oxidisation
• Capable of traversing up to 244m horizontally through a single line
• Capable of delivering beer up to 30m vertically through a single line
• Pump can be used to aid in beer line cleaning through wall mounted cleaning sockets
• Infinitely variable to suit all runs and rises
• Can dispense multlple taps (up to 5) from a single keg or keg series. This will cut walk-in cooler clutter by lowering the number of kegs on tap at one time which promotes prduct quality/freshness
• Feeds up to 3 taps through a single line